411261-001 300 GB 15000RPM 80-PIN ULTRA-320 SCSI (3.5) HOT PLUGGABLE HARD DRIVE WITH TRAY. BY HP
411261-001 300GB 15000RPM 3.5inch Large Form Factor Ultra-320 SCSI 80-Pin Hot-Swap Internal Hard Drive for Generation1 to Generation7 Proliant
Key Features :
Capacity : 300Gb
Interface : Scsi
Enclosure : Internal
Spindle Speed : 15000 Rpm
Technical Features :
External Data Transfer Rate : 320 Mbps
Seek Time : 3.8 Ms
Average Latency : 2 Ms
Interface (Detailed) : Scsi Ultra320
Hot Swap : Yes
HPE Proliant BL Series: BL20p G, BL20p G, BL20p G, BL25, BL40, BL45p G, BL60p HPE Proliant CL Series: CL185, CL380 HPE Proliant DL Series: DL360 G, DL360 G, DL360 G, DL360 G, DL360 G4, DL380 G, DL380 G, DL380 G, DL380 G, DL385 G, DL56, DL580 G, DL580 G, DL580 G, DL585 G, DL59, DL74, DL760 HPE Proliant ML Series: ML330 G, ML330 G, ML330 G, ML350 G, ML350 G, ML350 G, ML350 G, ML370 G, ML370 G, ML370 G, ML370 G, ML530 G, ML530 G, ML570 G, ML570 G, ML570 G, ML750
The Small Computer System Interface (SCSI) is a set of parallel interface standards developed by the American National Standards Institute (ANSI) for attaching printers, disk drives, scanners and other peripherals to computers. SCSI 411261-001.
SCSI required the use of an adapter card, unlike ATA, where the adapter is built into the device. SCSI is also the foundation of SAS and iSCSI, two common uses of SCSI technology in enterprise storage environment. SCSI 411261-001
Recent physical versions of SCSI?—?Serial Attached SCSI (SAS), SCSI-over-Fibre Channel Protocol (FCP), and USB Attached SCSI (UAS)?—?break from the traditional parallel SCSI bus and perform data transfer via serial communications using point-to-point links. Although much of the SCSI documentation talks about the parallel interface, all modern development efforts use serial interfaces. Serial interfaces have a number of advantages over parallel SCSI, including higher data rates, simplified cabling, longer reach, improved fault isolation and full-duplex capability. The primary reason for the shift to serial interfaces is the clock skew issue of high speed parallel interfaces, which makes the faster variants of parallel SCSI susceptible to problems caused by cabling and termination
Hot plugging (also called hot swapping) is the ability to add and remove devices to a computer system while the computer is running and have the operating system automatically recognize the change. This is useful when a system component fails as it enables a new device to be installed without system downtime.
Hot swapping is the term given to the process of replacing a key component of a computer system while it’s still running. Essentially you change a specific part without having to switch it or the whole system off. This enables a business to continue utilising the system without experiencing any kind of downtime.
This may sound like a relatively strange process given that we are all told to power down devices before making changes; but it is highly effective when changing the components a build. 411261-001 Hot Swap Hard Drive.
Contact us if you have any questions regarding 411261-001 or to know the compatibility of this product with your current system. We hope you found something that sparked your interest on our website. We would be very happy to answer any questions or quote a price on 411261-001 or any other product.